- Only £21.55 – 1 litre
- Only £82.99 – 5 litres
Availability: In stock
Shipping: Via Courier. Please call for a quote
Call us for a quote: 0844 858 2877
SUITABLE FOR INTERIOR & EXTERIOR USE
A colourless impregnating sealer for mechanically polished porcelain, limestone (including Jura) marble, slate and granite. Provides a completely natural finish on wall & floor surfaces. Easy to apply. Suitable for worktops and fireplaces. Strongly protects against water, oil, grease and dirt.
Ensure surface is clean, dry and free from contamination. If necessary, first clean surfaces with Heavy Duty Grime Remover and allow to fully dry. NB: It is important to remove any factory applied sealer or wax from the surface of porcelain before sealing.
Apply thinly and uniformly using a soft cloth or sponge. Within 20 minutes, whilst the sealer is still wet on the surface, buff well using a clean dry cloth or buffing machine. Leave to dry for 4 hours and then on more porous surfaces apply a second coat using the same method. It is important to remember to remove any excess from the surface and buff well between each coat. Do not apply in temperatures exceeding 25°C.Ensure underfloor heating is switched off.
Over applied and un-buffed sealer will dry and leave a greasy residue on the surface. To remove, apply white spirit or a little more sealer and then buff immediately. If you are unsure of correct application methods, test on an inconspicuous area, prior to general application. Treated areas should be dry enough to walk on after about 4 hours but will take 3 days to become fully water resistant.
This information is offered without guarantee. The material should be used so as to take account of the local conditions and the surfaces to be treated. In case of doubt, the product should be tried out in an inconspicuous area.