- Only £24.99 – 1 litre
- Only £84.99 – 5 litres
Availability: In stock
Shipping: Via Courier Please call for a quote
Call us for a quote: 0844 858 2877
SUITABLE FOR INTERIOR & EXTERIOR USE. LOW ODOUR.
A natural finish water based impregnating sealer. Delicately enhances colour. Helps protect against staining. Strongly repels water, oil and grease. Allows surface to breathe.
Preparation: Ensure surface to be treated is completely clean, dry and free from dirt, grim, cement and grout. If necessary, first wash surfaces with a dilute solution of Tiletech Heavy Duty Grime Remover 1:10 and white pad. Rinse well to remove residues and leave to dry (24 hours).
Roughcut, textured or riven surfaces: Shake bottle before use. Apply generously and evenly using a paint brush or sponge. On highly absorbent surfaces apply several coats wet-in-wet. After 15 minutes, remove any excess sealer with an absorbent cloth. Do not allow residues to dry on the surface.
Honed, smooth and polished surfaces: Shake bottle before use. Apply generously and evenly using lint free cloth, lamb’s wool applicator, paint pad or sponge. Ensure even distribution by wiping over several times. After 15 minutes, remove any excess sealer with an absorbent cloth. Polished surfaces should be finished after removal of excess by buffing with a soft lint free cloth or machine with buffing pad. This should be done while the sealer is still wet on the surface. Do not allow residues to dry on the surface.
Lower porosity floors – approx. 1-2 litres per 10m2 of floor
High porosity floors – approx. 3-4 litres per 10m2 of floor
Polished floors – approx. 1 litre per 20m2 of floor
This information is offered without guarantee. The material should be used so as to take account of the local conditions and the surfaces to be treated. In case of doubt, the product should be tried out in an inconspicuous area.