Power Stripper Tile Cleaner

Price:

  • Only £19.50 – 1 litre
  • Only £78.99 – 5 litres

Weight: 5kg

Availability: In stock

Shipping: Via Courier. Please call for a quote

Call us for a quote: 0844 858 2877

FOR INTERIOR & EXTERIOR USE

Suitable for travertine, stone, sandstone, slate, marble, porcelain, granite, terracotta, quarry, brick, concrete and external paving.

A high performance intensive cleaner for stripping and cleaning of vitrified glazed ceramics, travertine, natural stone, sandstone, slate, marble, granite, terracotta, quarry, brick, concrete, external paving, terrazzo and other mineral floors & walls. Helps remove oxidised linseed oil and other mineral oils.

DIRECTIONS:
To establish whether the tiles are colour fast and to determine optimal dilution for LTP Power Stripper, always test on an inconspicuous area prior to general application.

Surface cleaning: 1:12 in warm water
Deep stripping: 1:6 in warm water
In extreme cases: 1:4 in warm water (e.g.Removal of linseed oil)

Sweep or dry mop floor to remove grit and surface dirt. Mix stripper solution according to required dilution. Working in manageable sized areas, mop on solution to thoroughly wet floor. Let it work for 5 – 10 minutes, keeping floor damp with further solution should it begin to be absorbed. Agitate floor surface using a mildly abrasive pad.

If the floor will stand up to it, machine scrub with a stripping pad. Remove resulting dirty residue using clean warm water and absorbent cloths. If you are treating a large area a wet vacuum will prove helpful. Rinse thoroughly and allow to dry completely before applying further treatments. You may need to repeat washing process a couple of times on severely contaminated surfaces.

This information is offered without guarantee. The material should be used so as to take account of the local conditions and the surfaces to be treated. In case of doubt, the product should be tried out in an inconspicuous area.