Limestone Matt Finish Tile Sealer


  • Only £19.99 – 1 litre
  • Only £79.99 – 5 litres

Weight: 10kg

Availability: In stock

Shipping: Please call for a quote

Call us for a quote: 0844 858 2877


A natural, matt finish impregnating sealer. Delicately enhances colour and texture. Helps protect against staining. Strongly repels water, oil and grease. Allows surface to breathe.

Coverage: Approximately 10m2 (2-3 Coats) per litre.

DIRECTIONS FOR USE: Shake the bottle prior to use. Ensure surface to be treated is completely clean, dry and free from cement and grout. Apply this sealer with a soft cloth or brush allowing at least two hours between coats. More absorbent floors may require further coats and on such floors the product should be generously applied. One hour after application, rub over the surface with a soft fluff free cloth or buffing machine to obtain a uniform finish and remove any material not yet absorbed. This product will dry after about two hours, but will take a further three days to become fully resistant. N.B. The aim is to completely fill the substrate with sealer without over applying it. Do not apply in direct sunlight. The sealer will help to inhibit oil based stains but spillages should be wiped up immediately. On rougher surfaced floors it may be prudent to use an appropriate surface sealer in conjunction with this sealer.

This information is offered without guarantee. This material should be used so as to take into account of the local conditions and the surfaces treated. In case of doubt, the product should be tried out in an inconspicuous area.

Please call 0844 858 2877 if you require any additional information on products.