Ironwax Satin Finish Tile Sealer

Price:

  • Only £17.01 – 1 litre
  • Only £64.06 – 5 litres

Weight: 10kg

Availability: In stock

Shipping: Via Courier. Please call for a quote

Call us for a quote: 0844 858 2877

Suitable for Interior use only (Not wet rooms or shower enclosures)

Easy to apply, low maintenance self-shine satin finish film forming acrylic sealer. Enhances colour and texture, protects against staining and stubborn dirt, easy to maintain. May be used on travertine, limestone, sandstone, slate, un-polished marble, terracotta, porous quarries, bricks, terrazzo and concrete Suitable for domestic and commercial use.

DIRECTIONS:
Ensure surface to be treated is completely clean, dry (min 24hrs). Any retained moisture may cause the LTP Ironwax satin to dry opaque or prevent the seal from reaching full hardness.

Rough cut, textured or riven surfaces: Use a sponge or paint brush, apply a thin coat evenly in one direction. Do not rub or buff. Allow to dry (1 hr). Apply until an evenly thin film is created. (Avg. 3 times). For a higher sheen further coats should be applied at right angles to the previous (max.6).
Honed and smooth surfaces: apply using a J cloth saturated with the solution. Pour contents into a separate container. Dip cloth into the solution and wring out. Fold the cloth and apply a thin coat evenly to the surface without rubbing. Apply until an evenly thin film is created (avg. 3 times). Allow to dry (1 hr). For a higher sheen further coats should be applied at right angles to the first (max.6).

Do not over apply as too many coats may cause unsightly build up and/or reduce the efficiency of the product. Hardens after about an hour but will take a further three days to achieve full hardness and become fully water
resistant. If in doubt, experiment on spare tiles to establish the correct method of application and optimum number of coats before general use.

This information is offered without guarantee. The material should be used so as to take account of the local conditions and the surfaces to be treated. In case of doubt, the product should be tried out in an inconspicuous area.