- Only £11.31 – 1 litre
- Only £49.51 – 5 litres
Availability: In stock
Shipping: Please call for a quote
Call us for a quote: 0844 858 2877
FOR INTERIOR & EXTERIOR USE
For glazed and un-glazed ceramics, slate, quarry tiles, brick, terracotta & sandstone.
A rapid action cleaning agent for removing cement residues, grout stain, efflorescence and other similar deposits from glazed and unglazed ceramics, slate, quarry tiles, brick, terracotta, and stone. May be used in dilute or concentrated form.
In mild cases and on absorbent tiles: Dilute 1 part Grout Stain Remover in 4 parts warm water. Apply with a cloth or sponge wrung out in the solution. Wipe off thoroughly with a clean damp cloth.
In more severe cases: Dilute 1 part Grout Stain Remover in 1 part warm water. Apply liberally and spread over surface of tiles. If necessary, agitate with a scrubbing brush and leave to react for 5-10 minutes, keeping wet with additional Grout Stain Remover solution. Mop up and rinse thoroughly with clean water.
In extremely severe cases: Use undiluted and agitate with scrubbing brush or mechanical scrubber if necessary. Neutralise treated surface with clean water after use.
This information is offered without guarantee. The material should be used so as to take account of the local conditions and the surfaces to be treated. In case of doubt, the product should be tried out in an inconspicuous area.