Colour Intensifier Sealer and Stainblock


  • Only £12.49 – 500ml
  • Only £19.99 – 1 litre
  • Only £79.36 – 5 litres

Weight: 10kg

Availability: In stock

Shipping: Via Courier. Please call for a quote

Call us for a quote: 0844 858 2877

For Interior & Exterior use

Suitable for slate, natural stone (including Jura), tumbled marble, travertine, terracotta, quarry, terrazzo and sandstone. Provides enchanced matt finish. For use on wall and floor surfaces. Strongly protects against water ,oil grease and dirt. Allows surface to breathe.


This sealer is very difficult to remove once hardened. Do not over apply. The surface to be treated must be completely clean,dry and free from contamination.If necessary,first clean floor with Heavy Duty Grime Remover and allow to dry thoroughly. Apply this sealer thinly and uniformly with a cloth, brush or sponge and allow to penetrate for approximately 15-30 minutes before wiping over with a clean dry fluff-free cloth to remove all and any excess which may remain on the surface. N.B. The surface must retain a matt finish after treatment. Any excess left on the surface could oxidise to form an unsightly gloss varnish. For stronger colour enhancement and in the case of more absorbent surfaces, further coats may be applied. Allow at least 30-60 minutes from application of previous coat before applying further coat. Do not apply in direct sunlight or in a temperature exceeding 25 degrees C. Beware of application upon floors with underfloor heating as the product may dry prematurely. If you are unsure of correct application methods, test on an inconspicuous area, prior to general application.

This information is offered without guarantee. The material should be used so as to take account of the local conditions and the surfaces to be treated. In case of doubt, the product should be tried out in an inconspicuous area